带式干燥设备-尊龙凯时最新

带式干燥机

概述descriptions：

★该机是穿流连续式干燥设备，用于透气性较好的片状，条状，颗粒状物

料的干燥，对于脱水蔬菜，中药饮片等含水量高，而温度不允许高的物料

尤为合适，该系列干燥机具有干燥速度快，蒸发强度高，产品质量好的优

点。对脱水滤饼状的膏状物料，需经造粒或制成棒状后亦可干燥。

★this machine is a continuous penetrating flow drying equipment

applied .for drying pieces strip and particles state materials with good

ventilation .the machine is suitable for the materials such as

de-watering vegetable, herbal medicine of traditional chinese

medicine and othersfor which the water contents are high and high

drying temperature is not allowed. the machine owns the advantages,

of fast drying speed, high evaporation capacity and good product

quality. the de-watered filtered cake state paste material should be

made into particles or strips before drying process.

原理principle：

★物料由加料器均匀地铺在网带上，网带一般采用12-60目不锈钢丝网，

由传动装置拖动在干燥机内移动。干燥机由若干单元组成，每一单元热风

独立循环，部分尾气由专门湿风机排出，废气由调节阀控制，热气由下往

上或由上往下穿过铺满物料的网带完成热量与质量传递的进程，带走物料

的水份。网带缓慢移动，运行速度可根据物料温度自动调节，干燥后的成

品连续落入收料器中。上下循环单元根据用户需要可灵活配备，单元数量

亦可根据需要选取

★the materials are uniformly distributed on the mesh-belt by the

material feeder. the mesh-belt generally adopts 12-60 mesh stainless

steel mesh and it is drawn by a transmission device and move inside

the dryer . the dryer is composed of several sections. for each section

the hot air is circulated separately .part of exhausted gas is exhausted

by a special moisture exhaust blower . the waste gas is controlled

by an adjustment valve. the hot air passes thyough the mesh-belt

covered with bring water material away. the mesh-belt moves slowly,

running speed can be freely adjusted according to the material

property. the final products after the drying process will fall into the

material collector continuously . the top and low circulation units can

be freely equipped according to the user requirements .the number of

section might be selected according to the production demands.

技术参数technical data：